_____________________________________________________ The U.S. Department of Energy Computer Incident Advisory Capability ___ __ __ _ ___ / | / \ / \___ __|__ /___\ \___ _____________________________________________________ Information Bulletin Unix Sendmail Vulnerabilities February 22, 1995 1600 PST Number F-13 ______________________________________________________________________________ PROBLEM: Several vulnerabilities in the UNIX sendmail utility exist which may be exploited remotely and locally. PLATFORM: Unix; All implementations of sendmail. DAMAGE: Privileged access can be obtained by local and remote users. SOLUTION: Retrieve and install vendor patches or Berkeley Sendmail version 8.6.10 immediately. ______________________________________________________________________________ VULNERABILITY Exploitation of these vulnerabilities can be used by local and ASSESSMENT: remote users to read any file, overwrite or destroy files, or run programs on the system. At least one of these vulnerabilities is being exploited by intruders now. CIAC strongly recommends installing the appropriate patches immediately. Where that is not possible, implementing the workarounds described below as soon as possible. ______________________________________________________________________________ Critical Information about Unix Sendmail Vulnerabilities This bulletin supersedes all previous CIAC bulletins on Unix sendmail. CIAC has received updated information regarding several vulnerabilities in the sendmail program, one of which is widely known. The problems occur in many versions of sendmail (see below for details). The first vulnerability involves versions of sendmail that support the IDENT (RFC 1413) functionality. This vulnerability allows an intruder to gain access to the system remotely, even without an existing account on the system. In addition, several other problems have been identified in sendmail that allow intruders to gain unauthorized privileges. Intruders need to have an account on your system to exploit these problems. These problems are thought to exist in many versions of Unix sendmail. The table below indicates systems known at this time to be affected. The CERT Coordination Center is maintaining a list of affected versions of sendmail. The current list is attached to this bulletin (see Appendix A.) Future versions of this file can be obtained from ciac.llnl.gov, in the file /pub/ciac/bulletin/f-fy95/f-13.ciac-sendmail-README The following are the recommended solutions to the sendmail vulnerabilities: A. Obtain the appropriate patch from your vendor and install it according to the instructions included with the patch. Below is a summary of the information we have received from vendors. More details, including how to obtain patches, are contained in Appendix A. Vendor or Source Remote vul?/patch status Local vul?/patch status (IDENT) --------------- ------------------------ ------------------------ Eric Allman version 8.6.10 Not vul./ -- Not vul./ -- all other versions Vul./upgrade avail. Vul./upgrade avail. Apple Computer, Inc. v.3.1.1, 3.1 Not vul./ -- Vul./patch avail. earlier versions Vul./see appendix Vul./see appendix Berkeley Software Design, Inc. (BSDI) version 2.0 Not vul./ -- Vul./patch avail. soon other versions Vul./patch avail. soon Vul./patch avail. soon Cray Computer Corporation (Craycos) Not vul./ -- Vul./patch avail. Data General Corporation Not vul./ -- Not vul./ -- Digital Equipment Corp. Not vul./ -- Vul./patch avail. soon Harris Comp.Systems Corp. Vul./patch avail. Vul./patch avail. Hewlett-Packard Company Not vul./ -- Vul./patch avail.by Feb 23 IBM Corporation Not vul./ -- Vul./patch avail. Motorola Vul./patch avail. Vul./patch avail. Open Software Foundation Not vul./ -- Vul./see appendix The Santa Cruz Operation Not vul./ -- Vul./patch avail. soon Sequent Computer Systems Not vul./ -- Vul./patch avail. Silicon Graphics (SGI) Not vul./ -- Vul./patch avail. Solbourne (Grumman) Not vul./ -- Vul./patch avail. soon Sony Corporation Vul./patch avail. Vul./patch avail. Sun Microsystems, Inc. Not vul./ -- Vul./patch avail. B. Install Berkeley sendmail version 8.6.10, which is freely available by anonymous FTP (see Appendix A for locations). This version fixes all the problems described in this bulletin. Be aware that, depending upon the currently installed sendmail program, switching to a different sendmail may require significant effort such as rewriting the sendmail.cf file. C. Until you are able to install the appropriate patch or Berkeley sendmail 8.6.10, we recommend the following workarounds: 1. To protect against remote attacks only: If you are currently running sendmail versions 8.6.6 through 8.6.9, you can turn off the IDENT protocol by adding the following line to the configuration file and then restarting sendmail: Orident=0 If you are running 8.6.5 or earlier you cannot disable IDENT in this manner. Instead, you should upgrade to version 8.6.10. 2. To provide limited protection against local attacks: Install the "sendmail wrapper" that is provided in Appendix B of this bulletin. The wrapper is also available by anonymous FTP from: ciac.llnl.gov:/pub/ciac/bulletin/f-fy95/f-13.ciac-sendmail-wrapper.c MD5 = 5c930d9d139dfaa1dfc9de6c40ddf8c6 info.cert.org:/pub/tools/sendmail/sendmail_wrapper/sendmail_wrapper.c MD5 = 5c930d9d139dfaa1dfc9de6c40ddf8c6 ftp.auscert.org.au:/pub/auscert/tools/sendmail_wrapper.c MD5 = 5c930d9d139dfaa1dfc9de6c40ddf8c6 ftp.cert.dfn.de:/pub/tools/net/sendmail-wrapper/sendmail-wrapper.c MD5 = 5c930d9d139dfaa1dfc9de6c40ddf8c6 The installation instructions for installing the wrapper are contained within the source file. This wrapper does not solve the problems with sendmail 8.6.9 or with older versions. It should only be used until 8.6.10 or a vendor patch is installed. ______________________________________________________________________________ CIAC thanks the CERT Coordination Center and AUSCERT for the information provided in this bulletin. ______________________________________________________________________________ For additional information or assistance, please contact CIAC: Voice: 510-422-8193 FAX: 510-423-8002 STU-III: 510-423-2604 E-mail: ciac@llnl.gov Previous CIAC Bulletins and other information are available via anonymous FTP from ciac.llnl.gov (IP address 128.115.19.53). CIAC has several self-subscribing mailing lists for electronic publications: 1. CIAC-BULLETIN for Advisories, highest priority - time critical information, and Bulletins, important computer security information; 2. CIAC-NOTES for Notes, a collection of computer security articles; 3. SPI-ANNOUNCE for official news about Security Profile Inspector (SPI) software updates, new features, distribution and availability; 4. SPI-NOTES, for discussion of problems and solutions regarding the use of SPI products. CIAC's mailing lists are managed by a public domain software package called ListProcessor, which ignores E-mail header subject lines. To subscribe (add yourself) to one of our mailing lists, send the following request as the E-mail message body, substituting CIAC-BULLETIN, CIAC-NOTES, SPI-ANNOUNCE or SPI-NOTES for "list-name" and valid information for "LastName" "FirstName" and "PhoneNumber" when sending E-mail to ciac-listproc@llnl.gov: subscribe list-name LastName, FirstName PhoneNumber e.g., subscribe ciac-notes O'Hara, Scarlett 404-555-1212 x36 You will receive an acknowledgment containing address, initial PIN, and information on how to change either of them, cancel your subscription, or get help. ______________________________________________________________________________ PLEASE NOTE: Many users outside of the DOE and ESnet computing communities receive CIAC bulletins. If you are not part of these communities, please contact your agency's response team to report incidents. Your agency's team will coordinate with CIAC. The Forum of Incident Response and Security Teams (FIRST) is a world-wide organization. A list of FIRST member organizations and their constituencies can be obtained by sending E-mail to first-request@first.org with an empty subject line and a message body containing the line: send first-contacts. This document was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor the University of California nor any of their employees, makes any warranty, expressed or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial products, process, or service by trade name, trademark manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or the University of California. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government nor the University of California, and shall not be used for advertising or product endorsement purposes. ______________________________________________________________________________ Appendix A: Vendor Information ============================== Below is information we have received from vendors who have patches available or upcoming for the vulnerabilities described in this bulletin as of February 22, 1995. -------------------- Eric Allman Sendmail version 8.6.10 is not vulnerable. This version is available by anonymous FTP from ftp.cs.berkeley.edu:/ucb/sendmail ftp.uu.net:/networking/mail/sendmail/UCB info.cert.org:/pub/tools/sendmail/sendmail.8.6.10 ftp.cert.dfn.de:/pub/tools/net/sendmail ftp.auscert.org.au:/pub/coast/mirrors/ftp.cs.berkeley.edu/ucb/sendmail In all of the above locations, the MD5 checksums are the same, MD5 (sendmail.8.6.10.base.tar.Z) = 4ab8ac267b1eaf8d1725c14cf4b2e885 MD5 (sendmail.8.6.10.cf.tar.Z) = c70c576697bbbf047ed379a7b98633f6 MD5 (sendmail.8.6.10.misc.tar.Z) = 6212390ca0bb4b353e29521f1aab492f MD5 (sendmail.8.6.10.patch) = 08d6f977c171ea858f1e940163212c3a MD5 (sendmail.8.6.10.xdoc.tar.Z) = 8b2252943f365f303b6302b71ef9a841 -------------------- Apple Computer, Inc. An upgrade to A/UX version 3.1 (and 3.1.1) for these vulnerabilities is available. The upgrade is a replacement of the sendmail binary. It is available via anonymous FTP from ftp.support.apple.com: pub/apple_sw_updates/US/Unix/A_UX/supported/3.x/sendmail/ It is also available via anonymous FTP from abs.apple.com: pub/abs/aws95/patches/sendmail/ In both cases the compressed binary has the following signature: MD5 (sendmail.Z) = 31bb15604517630f46d7444a6cfab3f1 Uncompress(1) this file and replace the existing version in /usr/lib; be sure to preserve the hard links to /usr/ucb/newaliases and /usr/ucb/mailq, kill the running sendmail and restart. Earlier versions of A/UX are not supported by this patch. Users of previous versions are encouraged to update their system or compile the latest version of sendmail available from ftp.cs.berkeley.edu. Customers should contact their reseller for any additional information. -------------------- Berkeley Software Design. Inc. (BSDI) BSD/OS V2.0 is vulnerable to the local user problems, but not the remote user (IDENT) problem. All earlier releases of BSD/OS are vulnerable to both problems. Patches are being developed and will be made available via anonymous FTP on ftp.bsdi.com in the directory "bsdi/support". BSDI Contact Information: BSDI Customer Support Berkeley Software Design, Inc. 7759 Delmonico Drive Colorado Springs, CO 80919 Toll Free: +1 800 ITS BSD8 (+1 800 486 2738) Phone: +1 719 260 8114 Fax: +1 719 598 4238 Email: support@bsdi.com -------------------- Cray Computer Corporation (Craycos) A new version of sendmail, one that does not have the problem, is available from CCC. Please contact your site analyst for more information. You may also contact CCC Field Support using the address below. e-mail: support@craycos.com -------------------- Digital Equipment Corporation Digital will announce the availability of a kit as soon as it becomes available. -------------------- Harris Computer Systems Corporation Request the appropriate patch for Harris NightHawk Systems, as follows: System Patch cx/ux 7.1 cx7.1-030 cx/ux 6.2 cx6.2-114 cx/sx 6.2 cx6.2-114 If you need further information, contact the Harris Support Hotline 1-800-245-6453. -------------------- Hewlett-Packard Company Hewlett-Packard HP-UX Patches available by 2/23/95 Vulnerable to: -d DEBUG option Latest queue problem Not Vulnerable to: IDENT problem Apply patch PHNE_5264 (series 700/800, HP-UX 9.x), or PHNE_5263 (series 700/800, HP-UX 8.x), or PHNE_5260 (series 300/400, HP-UX 9.0), or PHNE_5259 (series 300/400, HP-UX 8.x) You can get patches via: 1. Ftp / email / kermit to HP SupportLine To obtain a copy of the HP SupportLine email service user's guide, send the following in the TEXT PORTION OF THE MESSAGE to support@support.mayfield.hp.com (no Subject is required): send guide 2. World Wide Web: http://support.mayfield.hp.com If you need further information, contact HP SupportLine: 1-415-691-3888 phone: 1-415-691-3680 telnet/ftp: support.mayfield.hp.com (192.6.148.19) -------------------- IBM Corporation A possible security exposure exists in the bos.obj sendmail subsystem in all AIX releases. The user can cause arbitrary data to be written into the sendmail queue file. Non-privileged users can affect the delivery of mail, as well as run programs as other users. Workaround A. Apply the patch for this problem. The patch is available from software.watson.ibm.com. The files will be located in the /pub/aix/sendmail in compressed tar format. The MD5 checksum for the binary file is listed below, ordinary "sum" checksums follow as well. File sum MD5 Checksum ---- --- ------------ sendmail.tar.Z 35990 e172fac410a1b31f3a8c0188f5fd3edb B. The official fix for this problem can be ordered as Authorized Program Analysis Report (APAR) IX49257. To order an APAR from IBM in the U.S. call 1-800-237-5511 and ask for shipment as soon as it is available (in approximately two weeks). APARs may be obtained outside the U.S. by contacting a local IBM representative. -------------------- Motorola Computer Group (MCG) The following MCG platforms are vulnerable: R40 R32 running CNEP add-on product R3 running CNEP add-on product The following MCG platforms are not vulnerable: R32 not including CNEP add-on product R3 not including CNEP add-on product R2 VMEEXEC VERSADOS The patch is available and is identified as "patch_43004 p001" or "SCML#5552". It is applicable to OS revisions from R40V3 to R40V4.3. For availability of patches for other versions of the product contact your regional MCG office at the numbers listed below. Obtain and install the appropriate patch according to the instructions included with the patch. The patch can be obtained through anonymous ftp from ftp.mcd.mot.com [144.191.210.3] in the pub/patches/r4 directory. The patch can also be obtained via sales and support channels. Questions regarding the patch should be forwarded to sales or support channels. For verification of the patch file: Results of sum -r == 27479 661 sum == 32917 661 md5 == 8210c9ef9441da4c9a81c527b44defa6 Contact numbers for Sales and Support for MCG: United States (Tempe, Arizona) Tel: +1-800-624-0077 Fax: +1-602-438-3865 Europe (Brussels, Belgium) Tel: +32-2-718-5411 Fax: +32-2-718-5566 Asia Pacific / Japan (Hong Kong) Tel: +852-966-3210 Fax: +852-966-3202 Latin America / Australia / New Zealand (U.S.) Tel: +1 602-438-5633 Fax: +1 602-438-3592 -------------------- Open Software Foundation The local vulnerability described in the advisory can be exploited in OSF's OSF/1 R1.3 (this is different from DEC's OSF/1). Customers should apply the relevant portions of cert's fix to their source base. For more information please contact OSF's support organization at osf1-defect@osf.org. -------------------- The Santa Cruz Operation SCO systems are not vulnerable to the IDENT problem. Systems running the MMDF mail system are not vulnerable to the remote or local problems. The following releases of SCO products are vulnerable to the local problems. ============================================================================ SCO TCP/IP 1.1.x for SCO Unix System V/386 Operating System Release 3.2 Versions 1.0 and 2.0 SCO TCP/IP 1.2.x for SCO Unix System V/386 Operating System Release 3.2 Versions 4.x SCO TCP/IP 1.2.0 for SCO Xenix System V/386 Operating System Release 2.3.4 SCO Open Desktop Lite Release 3.0 SCO Open Desktop Release 1.x, 2.0, and 3.0 SCO Open Server Network System, Release 3.0 SCO Open Server Enterprise System, Release 3.0 Patches are currently being developed for the release 3.0 and 1.2.1 based products. The latest sendmail available from SCO, on Support Level Supplement (SLS) net382d, is also vulnerable. Contacts for further information: e-mail: support@sco.COM USA, Canada, Pacific Rim, Asia, Latin America 6am-5pm Pacific Daylight Time (PDT) ---------------------------------------------- 1-408-425-4726 (voice) 1-408-427-5443 (fax) Europe, Middle East, Africa: 9am-5:30pm British Standard Time (BST) ------------------------------------------------------------------- +44 (0)923 816344 (voice) +44 (0)923 817781 (fax) -------------------- Sequent Computer Systems Sequent customers should contact Sequent Customer Service and request the Fastpatch for sendmail. phone: 1-800-854-9969. e-mail: service-question@sequent.com -------------------- Silicon Graphics, Inc. At the time of writing of this document, patches/binaries are planned for IRIX versions 4.x, 5.2, 5.3, 6.0, and 6.0.1 and will be available to all SGI customers. The patches/binaries may be obtained via anonymous ftp (ftp.sgi.com) or from your support/service provider. On the anonymous ftp server, the binaries/patches can be found in either ~ftp/patches or ~ftp/security directories along with more current pertinent information. For any issues regarding this patch, please, contact your support/service provider or send email to cse-security-alert@csd.sgi.com. -------------------- Sony Corporation NEWS-OS 6.0.3 vulnerable; Patch SONYP6022 [sendmail] is available. NEWS-OS 6.1 vulnerable; Patch SONYP6101 [sendmail] is available. NEWS-OS 4.2.1 vulnerable; Patch 0101 [sendmail-3] is available. Note that this patch is not included in 4.2.1a+. Patches are available via anonymous FTP in the /pub/patch/news-os/un-official directory on ftp1.sony.co.jp [202.24.32.18]: 4.2.1a+/0101.doc describes about patch 0101 [sendmail-3] 4.2.1a+/0101_C.pch patch for NEWS-OS 4.2.1C/a+C 4.2.1a+/0101_R.pch patch for NEWS-OS 4.2.1R/RN/RD/aRD/aRS/a+R 6.0.3/SONYP6022.doc describes about patch SONYP6022 [sendmail] 6.0.3/SONYP6022.pch patch for NEWS-OS 6.0.3 6.1/SONYP6101.doc describes about patch SONYP6101 [sendmail] 6.1/SONYP6101.pch patch for NEWS-OS 6.1 Filename BSD SVR4 Checksum Checksum -------------- --------- --------- 4.2.1a+/0101.doc 55361 2 19699 4 4.2.1a+/0101_C.pch 60185 307 25993 614 4.2.1a+/0101_R.pch 35612 502 31139 1004 6.0.3/SONYP6022.doc 03698 2 36652 4 6.0.3/SONYP6022.pch 41319 436 20298 871 6.1/SONYP6101.doc 40725 2 3257 3 6.1/SONYP6101.pch 37762 434 4624 868 MD5 checksums are: MD5 (4.2.1a+/0101.doc) = c696c28abb65fffa5f2cb447d4253902 MD5 (4.2.1a+/0101_C.pch) = 20c2d4939cd6ad6db0901d6e6d5ee832 MD5 (4.2.1a+/0101_R.pch) = 840c20f909cf7a9ac188b9696d690b92 MD5 (6.0.3/SONYP6022.doc) = b5b61aa85684c19e3104dd3c4f88c5c5 MD5 (6.0.3/SONYP6022.pch) = 1e4d577f380ef509fd5241d97a6bcbea MD5 (6.1/SONYP6101.doc) = 62601c61aef99535acb325cf443b1b25 MD5 (6.1/SONYP6101.pch) = 87c0d58f82b6c6f7811750251bace98c If you need further information, contact your vendor. -------------------- Solbourne Grumman System Support Corporation now performs all Solbourne software and hardware support. Please contact them for further information. e-mail: support@nts.gssc.com phone: 1-800-447-2861 -------------------- Sun Microsystems, Inc. Sun has developed patches for all supported platforms and architectures, including Trusted Solaris, Solaris x86, and Interactive Unix. Note that Sun no longer supports the sun3 architecture and versions of the operating system that precede 4.1.3. Current patches are listed below. OS version Patch ID Patch File Name ---------- --------- --------------- 4.1.3 100377-19 100377-19.tar.Z 4.1.3_U1 101665-04 101665-04.tar.Z 5.3 101739-07 101739-07.tar.Z 5.4 102066-04 102066-04.tar.Z 5.4_x86 102064-04 102064-04.tar.Z The patches can be obtained from local Sun Answer Centers and through anonymous FTP from ftp.uu.net in the /systems/sun/sun-dist directory. In Europe, the patches are available from mcsun.eu.net in the /sun/fixes directory. The patches are also available through the usual URL on World Wide Web. Sun is issuing Security Bulletin #129 with details on February 22; the patches will become available worldwide during the 24 hours to follow. Appendix B: Sendmail Wrapper ============================= This wrapper can be used to improve security until you can install a vendor patch or sendmail version 8.6.10. Note that it does not address all known sendmail vulnerabilities. /* ** sendmail_wrapper.c - wrap sendmail to prevent newlines in command line ** and clean up the environment. ** ** Authors: Eric Halil, Danny Smith ** AUSCERT ** c/o Prentice Centre ** The University of Queensland ** Qld. 4072. ** Australia ** 22-Feb-1995 ** ** Disclaimer: The use of this program is at your own risk. It is ** designed to combat a particular vulnerability, and may ** not combat other vulnerabilities, either past or future. ** The decision to use this program is yours, as are the ** consequences of its use. ** ** This program is designed to be an interim relief measure ** until appropriate patches can be obtained from your vendor. ** ** Installation instructions ** ========================= ** ** 1. su to root. ** ** 2. Determine the location of sendmail. On SunOS and Ultrix ** systems, it is located in the /usr/lib directory. On BSDI ** systems, it is located in the /usr/sbin directory. For example ** purposes only, /usr/lib will be used in the following instructions ** steps. ** ** 3. Copy the sendmail program to sendmail.real. Change the permissions ** on the copy of sendmail. ** ** # cd /usr/lib ** # cp sendmail sendmail.real ** # chmod 0700 sendmail.real ** ** 4. Determine the permissions, owner, and group of sendmail. This ** information will be used later. ** ** For BSD users: ** # ls -lg sendmail ** For System V users: ** # ls -l sendmail ** ** 5. Edit this wrapper program and define REAL_SENDMAIL. By default, ** REAL_SENDMAIL is defined as "/usr/lib/sendmail.real". ** ** 6. Compile this program in a directory other than /usr/lib. For ** example to use /tmp, first copy this file into /tmp. ** ** # cd /tmp ** # cc -O -o sendmail sendmail_wrapper.c ** ** 7. Copy this new wrapper program into the directory containing sendmail. ** Make sure this directory and its parent directories are protected so ** only root is able to make changes to files in the directory. This ** will replace the existing sendmail. The following steps should be ** executed quickly. ** ** Users will not be able to send e-mail during the time when the ** wrapper is copied into place until the chmod command has been ** executed. Use the information from step #4 and set the permissions ** owner, and group of the new sendmail. ** ** # cp sendmail /usr/lib/sendmail ** # cd /usr/lib ** # chown root sendmail ** # chmod 4511 sendmail ** ** 8. Kill the running sendmail process and start the new sendmail. ** ** For SunOS and Ultrix: ** # kill -9 `head -1 /etc/sendmail.pid` ** # /usr/lib/sendmail -bd -q1h ** ** For BSDI: ** # kill -9 `head -1 /var/run/sendmail.pid` ** # /usr/sbin/sendmail -bd -q1h ** ** For other systems, follow your vendors guidelines or use the ** following command. Kill the processes and start the new sendmail. ** # ps -auxw | grep sendmail | grep -v grep ** # kill -9 (process id numbers) ** # ./sendmail -bd -q1h ** ** 9. Test that mail still works. ** Version 1.1 22-Feb-1995. */ #include /* ** REAL_SENDMAIL needs to be defined using the full pathname ** of the real sendmail. A few known locations have been defined. */ #ifdef sun #define REAL_SENDMAIL "/usr/lib/sendmail.real" #endif #ifdef ultrix #define REAL_SENDMAIL "/usr/lib/sendmail.real" #endif #if defined (__bsdi__) || defined(__386BSD__) || defined(__FreeBSD__) || defined(__NetBSD__) #define REAL_SENDMAIL "/usr/sbin/sendmail.real" #endif int main( argc, argv, envp) int argc; char *argv[]; char *envp[]; { char *cp; int i; int j; int status; /* ** Ensure that there are no newlines in the arguments */ for ( i = 1; i < argc; i++) { for ( cp = argv[ i]; *cp != '\0'; cp++) { if ( ( *cp == '\r') || ( *cp == '\n')) { *cp = ' '; } } } /* ** While we are at it, let's clean up the environment ** Remove LD_*, IFS, and PATH enviroment variables before execing */ i = 0; while( envp[ i] != NULL) { if ( strncmp( envp[ i], "LD_", 3) == 0) { j = i; while ( envp[ j] != NULL) { envp[ j] = envp[ j + 1]; j++; } continue; } if ( strncmp( envp[ i], "IFS=", 4) == 0) { j = i; while ( envp[ j] != NULL) { envp[ j] = envp[ j + 1]; j++; } continue; } if ( strncmp( envp[ i], "PATH=", 5) == 0) { j = i; while ( envp[ j] != NULL) { envp[ j] = envp[ j + 1]; j++; } continue; } /* ** Now check for newlines in environment variables */ for ( cp = envp[ i]; *cp != '\0'; cp++) { if ( ( *cp == '\r') || ( *cp == '\n')) { *cp = ' '; } } /* ** next environment variable */ i++; } /* ** exec the real sendmail now */ status = execve( REAL_SENDMAIL, argv, envp); perror( "execve sendmail"); return( status); }