__________________________________________________________ The U.S. Department of Energy Computer Incident Advisory Capability ___ __ __ _ ___ / | /_\ / \___ __|__ / \ \___ __________________________________________________________ INFORMATION BULLETIN Vulnerability in Win 32 API (935839) [Microsoft Security Bulletin (MS07-035)] June 12, 2007 18:00 GMT Number R-268 [REVISED 22 June 2007] ______________________________________________________________________________ PROBLEM: A remote code execution vulnerability exists in the way that the Win32 API validates parameters. PLATFORM: Windows 2000 Service Pack 4 Windows XP Service Pack 2 Windows XP Professional x64 Edition and Service Pack 2 Windows Server 2003 Service Pack 1 and 2 Windows Server 2003 x64 Edition and Service Pack 2 Windows Server 2003 with SP1 and SP2 for Itanium-based Systems Storage Management Appliance (SMA) v2.1 software running on Storage Management Appliance I, II, III DAMAGE: Could allow remote code execution and take complete control of an affected system. SOLUTION: Upgrade to the appropriate version. ______________________________________________________________________________ VULNERABILITY The risk is HIGH. Could allow remote code execution and take ASSESSMENT: complete control of an affected system. ______________________________________________________________________________ LINKS: CIAC BULLETIN: http://www.ciac.org/ciac/bulletins/r-268.shtml ORIGINAL BULLETIN: http://www.microsoft.com/technet/security/Bulletin/MS07-035.mspx ADDITIONAL LINK: Visit Hewlett-Packard's Subscription Service for: HPSBST02231 SSRT071438 rev. 1 CVE: http://www.cve.mitre.org/cgi-bin/cvename.cgi?name= CVE-2007-2219 ______________________________________________________________________________ REVISION HISTORY: 06/22/2007 - revised R-268 to add a link to HPSBST02231 SSRT071438 rev.1 for Storage Management Appliance (SMA) v2.1 software running on Storage Management Appliance I, II, III. [***** Start Microsoft Security Bulletin (MS07-035) *****] Microsoft Security Bulletin MS07-035 — Critical Vulnerability in Win 32 API Could Allow Remote Code Execution (935839) Published: June 12, 2007 Version: 1.0 General Information Executive Summary This critical security update resolves a privately reported vulnerability in a Win32 API. This vulnerability could allow remote code execution or elevation of privilege if the affected API is used locally by a specially crafted application. Therefore applications that use this component of the Win32 API could be used as a vector for this vulnerability. For example, Internet Explorer uses this Win32 API function when parsing specially crafted Web pages. This is a critical security update for all supported versions of Windows 2000, Windows XP, and Windows Server 2003. For more information, see the subsection, Affected and Non-Affected Software, in this section. This security update addresses the vulnerability by changing the way the Win32 API validates parameters. For more information about the vulnerability, see the Frequently Asked Questions (FAQ) subsection for the specific vulnerability entry under the next section, Vulnerability Information. Recommendation. Microsoft recommends that customers apply the update immediately. Known Issues. None Top of section Affected and Non-Affected Software In the following tables of affected and non-affected software, software versions that are not listed are past their support lifecycle. To determine the support lifecycle for your product and version, visit Microsoft Support Lifecycle. Affected Software Operating System Maximum Security Impact Aggregate Severity Rating Bulletins Replaced By This Update Windows 2000 Service Pack 4 Remote Code Execution Critical MS06-051 Windows XP Service Pack 2 Remote Code Execution Critical MS06-051 Windows XP Professional x64 Edition and Windows XP Professional x64 Edition Service Pack 2 Remote Code Execution Critical MS06-051 Windows Server 2003 Service Pack 1 and Windows Server 2003 Service Pack 2 Remote Code Execution Critical MS06-051 Windows Server 2003 x64 Edition and Windows Server 2003 x64 Edition Service Pack 2 Remote Code Execution Critical MS06-051 Windows Server 2003 with SP1 for Itanium-based Systems and Windows Server 2003 with SP2 for Itanium-based Systems Remote Code Execution Critical MS06-051 Non-Affected Software Operating System Windows Vista Windows Vista x64 Edition Top of section Frequently Asked Questions (FAQ) Related to This Security Update I am using an older version of the software discussed in this security bulletin. What should I do? The affected software listed in this bulletin has been tested to determine which versions are affected. Other versions are past their support life cycle. To determine the support life cycle for your product and version, visit Microsoft Support Lifecycle. It should be a priority for customers who have older versions of the software to migrate to supported versions to prevent potential exposure to vulnerabilities. For more information about the Windows Product Lifecycle, visit the following Microsoft Support Lifecycle. For more information about the extended security update support period for these operating system versions, visit the Microsoft Product Support Services Web site. Customers who require custom support for older software must contact their Microsoft account team representative, their Technical Account Manager, or the appropriate Microsoft partner representative for custom support options. Customers without an Alliance, Premier, or Authorized Contract can contact their local Microsoft sales office. For contact information, visit the Microsoft Worldwide Information Web site, select the country, and then click Go to see a list of telephone numbers. When you call, ask to speak with the local Premier Support sales manager. For more information, see the Windows Operating System Product Support Lifecycle FAQ. Top of section Vulnerability Information Severity Ratings and Vulnerability Identifiers Vulnerability Severity Rating and Maximum Security Impact by Affected Software Affected Software Win32 API Vulnerability – CVE-2007-2219 Aggregate Severity Rating Windows 2000 Service Pack 4 Critical Remote Code Execution Critical Windows XP Service Pack 2 Critical Remote Code Execution Critical Windows XP Professional x64 Edition and Windows XP Professional x64 Edition Service Pack 2 Critical Remote Code Execution Critical Windows Server 2003 Service Pack 1 and Windows Server 2003 Service Pack 2 Critical Remote Code Execution Critical Windows Server 2003 x64 Edition and Windows Server 2003 x64 Edition Service Pack 2 Critical Remote Code Execution Critical Windows Server 2003 with SP1 for Itanium-based Systems and Windows Server 2003 with SP2 for Itanium-based Systems Critical Remote Code Execution Critical Top of section Win32 API Vulnerability - CVE-2007-2219 A remote code execution vulnerability exists in the way that the Win32 API validates parameters. An attacker could exploit the vulnerability by constructing a specially crafted Web page that could potentially allow remote code execution if a user viewed the Web page. An attacker who successfully exploited this vulnerability could take complete control of an affected system. To view this vulnerability as a standard entry in the Common Vulnerabilities and Exposures list, see CVE-2007-2219. Mitigating Factors for Win32 API Vulnerability - CVE-2007-2219 Mitigation refers to a setting, common configuration, or general best-practice, existing in a default state, that could reduce the severity of exploitation of a vulnerability. The following mitigating factors may be helpful in your situation: • In a Web-based attack scenario, an attacker could host a Web site that contains a Web page that is used to exploit this vulnerability. In addition, Web sites that accept or host user-provided content or advertisements could contain specially crafted content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to convince users to visit the Web site, typically by getting them to click a link in an e-mail message or Instant Messenger message that takes users to the attacker's Web site. • An attacker who successfully exploited this vulnerability could gain the same user rights as the local user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights. Top of section Workarounds for Win32 API Vulnerability - CVE-2007-2219 Workaround refers to a setting or configuration change that does not correct the underlying vulnerability but would help block known attack vectors before you apply the update. Microsoft has tested the following workarounds and states in the discussion whether a workaround reduces functionality: Read e-mail messages in plain text format to help protect yourself from the HTML e-mail attack vector You can help protect yourself against this vulnerability by changing your e-mail settings to read e-mail messages in plain text using Outlook 2002 and later, Outlook Express 6 and later, or Windows Mail. For information in Outlook, search “plain text” in Help and review “Read messages in plain text.” In Outlook Express, search “plain text” in Help and review “Reducing your risk of getting e-mail viruses.” In Windows Mail, search “plain text” in Help and review “Security and privacy in Windows Mail.” Impact of Workaround: E-mail messages that are viewed in plain text format will not contain pictures, specialized fonts, animations, or other rich content. Additionally: • The changes are applied to the preview pane and to open messages. • Pictures become attachments so that they are not lost. • Because the message is still in Rich Text or HTML format in the store, the object model (custom code solutions) may behave unexpectedly. Top of section FAQ for Win32 API Vulnerability - CVE-2007-2219 What is the scope of the vulnerability? This is a remote code execution vulnerability. An attacker who successfully exploited this vulnerability could remotely take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights. What causes the vulnerability? The Win32 API does not correctly validate parameters passed to it in a function call. What is the Win 32 API? The Microsoft Win 32 application programming interface (API) provides 32-bit services used by all Windows-based applications. You can provide your application with a graphical user interface; access system resources such as memory and devices; display graphics and formatted text; incorporate audio, video, networking, or security. For more information, see the Microsoft Developer Network. What might an attacker use the vulnerability to do? An attacker who successfully exploited this vulnerability could take complete control of the affected system. How could an attacker exploit the vulnerability? An attacker could host a specially crafted Web site that is designed to exploit this vulnerability through Internet Explorer and then convince a user to view the Web site. This can also include Web sites that accept user-provided content or advertisements, Web sites that host user-provided content or advertisements, and compromised Web sites. These Web sites could contain specially crafted content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to convince users to visit the Web site, typically by getting them to click a link in an e-mail message or in an Instant Messenger request that takes users to the attacker's Web site. What systems are primarily at risk from the vulnerability? This vulnerability requires that a user either be logged on locally and run a specially crafted application or that a user be logged on and visits a Web site for any malicious action to occur. Therefore, any systems where Internet Explorer or multiple users have permissions to log on locally is used frequently, such as workstations or terminal servers, are at the most risk from this vulnerability. What does the update do? The update removes the vulnerability by modifying the way that the Win API validates parameters passed to it in a function call. When this security bulletin was issued, had this vulnerability been publicly disclosed? No. Microsoft received information about this vulnerability through responsible disclosure. When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited? No. Microsoft had not received any information to indicate that this vulnerability had been publicly used to attack customers and had not seen any examples of proof of concept code published when this security bulletin was originally issued. Top of section Top of section Update Information Detection and Deployment Tools and Guidance Manage the software and security updates you need to deploy to the servers, desktop, and mobile systems in your organization. For more information see the TechNet Update Management Center. The Microsoft TechNet Security Web site provides additional information about security in Microsoft products. Security updates are available from Microsoft Update, Windows Update, and Office Update. Security updates are also available at the Microsoft Download Center. You can find them most easily by doing a keyword search for "security_patch." Finally, security updates can be downloaded from the Windows Update Catalog. For more information about the Windows Update Catalog, see Microsoft Knowledge Base Article 323166. Detection and Deployment Guidance Microsoft has provided detection and deployment guidance for this month’s security updates. This guidance will also help IT professionals understand how they can use various tools to help deploy the security update, such as Windows Update, Microsoft Update, Office Update, the Microsoft Baseline Security Analyzer (MBSA), the Office Detection Tool, Microsoft Systems Management Server (SMS), the Extended Security Update Inventory Tool, and the Enterprise Update Scan Tool (EST). For more information, see Microsoft Knowledge Base Article 910723. Microsoft Baseline Security Analyzer Microsoft Baseline Security Analyzer (MBSA) allows administrators to scan local and remote systems for missing security updates as well as common security misconfigurations. For more information about MBSA visit Microsoft Baseline Security Analyzer Web site. The following table provides the MBSA detection summary for this security update. Software MBSA 1.2.1 MBSA 2.0.1 Windows 2000 Service Pack 4 Yes Yes Windows XP Service Pack 2 Yes Yes Windows XP Professional x64 Edition and Microsoft Windows XP Professional x64 Edition Service Pack 2 No Yes Windows Server 2003 Service Pack 1 and Windows Server 2003 Service Pack 2 Yes Yes Windows Server 2003 x64 Edition and Microsoft Windows Server 2003 x64 Edition Service Pack 2 No Yes Windows Server 2003 with SP1 for Itanium-based Systems and Microsoft Windows Server 2003 with SP2 for Itanium-based Systems No Yes For more information about MBSA, visit the MBSA Web site. For more information about the software that Microsoft Update and MBSA 2.0 currently do not detect, see Microsoft Knowledge Base Article 895660. Windows Server Update Services By using Windows Server Update Services (WSUS), administrators can deploy the latest critical updates and security updates for Windows 2000 operating systems and later, Office XP and later, Exchange Server 2003, and SQL Server 2000 to Windows 2000 and later operating systems. For more information about how to deploy this security update using Windows Server Update Services, visit the Windows Server Update Services Web site. Systems Management Server The following table provides the SMS detection and deployment summary for this security update. Software SMS 2.0 SMS 2003 Windows 2000 Service Pack 4 Yes Yes Windows XP Service Pack 2 Yes Yes Windows XP Professional x64 Edition and Windows XP Professional x64 Edition Service Pack 2 No Yes Windows Server 2003 Service Pack 1 and Windows Server 2003 Service Pack 2 Yes Yes Windows Server 2003 x64 Edition and Windows Server 2003 x64 Edition Service Pack 2 No Yes Windows Server 2003 with SP1 for Itanium-based Systems and Windows Server 2003 with SP2 for Itanium-based Systems No Yes SMS 2.0 and SMS 2003 Software Update Services (SUS) Feature Pack can use MBSA 1.2.1 for detection and therefore have the same limitation that is listed earlier in this bulletin related to programs that MBSA 1.2.1 does not detect. For SMS 2.0, the SMS SUS Feature Pack, which includes the Security Update Inventory Tool (SUIT), can be used by SMS to detect security updates. SMS SUIT uses the MBSA 1.2.1 engine for detection. For more information about SUIT, visit the following Microsoft Web site. For more information about the limitations of SUIT, see Microsoft Knowledge Base Article 306460. The SMS SUS Feature Pack also includes the Microsoft Office Inventory Tool to detect required updates for Microsoft Office applications. For SMS 2003, the SMS 2003 Inventory Tool for Microsoft Updates (ITMU) can be used by SMS to detect security updates that are offered by Microsoft Update and that are supported by Windows Server Update Services. For more information about the SMS 2003 ITMU, visit the following Microsoft Web site. SMS 2003 can also use the Microsoft Office Inventory Tool to detect required updates for Microsoft Office applications. For more information about SMS, visit the SMS Web site. Top of section Security Update Deployment Affected Software For information about the specific security update for your affected software, click the appropriate link: Windows 2000 (all versions and editions) Reference Table The following table contains the security update information for this software. You can find additional information in the subsection, Deployment Information, in this section. Inclusion in Future Service Packs The update for this issue may be included in a future update rollup Deployment Installing without user intervention Windows 2000 Service Pack 4: Windows2000-kb935839-x86-enu /quiet Installing without restarting Windows 2000 Service Pack 4: Windows2000-kb935839-x86-enu /norestart Update log file Windows 2000 Service Pack 4: KB935840.log Further information See the subsection, Detection and Deployment Tools and Guidance Restart Requirement Restart required Yes, you must restart your system after you apply this security update Hotpatching Not applicable Removal Information Windows 2000 Service Pack 4: Use Add or Remove Programs tool in Control Panel or the Spuninst.exe utility located in the %Windir%\$NTUninstallKB935839$\Spuninst folder File Information See the subsection, File Information, in this section, or Microsoft Knowledge Base Article 935839 for the full file manifest Registry Key Verification For Windows 2000 Service Pack 4: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows 2000\SP5\KB935839\Filelist File Information The English version of this security update has the file attributes that are listed in the following table. The dates and times for these files are listed in coordinated universal time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time tool in Control Panel. All supported and affected editions of Windows 2000 Service Pack 4: File Name Version Date Time Size kernel32.dll 5.0.2195.7135 16-Apr-2007 12:44 712,976 mpr.dll 5.0.2195.7134 16-Apr-2007 12:44 54,032 Note For a complete list of supported versions, see the Support Lifecycle Index. For a complete list of service packs, see Lifecycle Supported Service Packs. For more information on the support lifecycle policy, see Microsoft Support Lifecycle. Top of section Deployment Information Installing the Update When you install this security update, the installer checks to see if one or more of the files that are being updated on your system have previously been updated by a Microsoft hotfix. If you have previously installed a hotfix to update one of these files, the installer copies any applicable RTMQFE, SP1QFE, or SP2QFE files to your system. Otherwise, the installer copies the RTMGDR, SP1GDR, or SP2GDR files to your system. Security updates may not contain all variations of these files. For more information about this behavior, see Microsoft Knowledge Base Article 824994. For more information about the Package Installer, visit the Microsoft TechNet Web site. For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684. This security update supports the following setup switches. Supported Security Update Installation Switches Switch Description /help Displays the command-line options Setup Modes /passive Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the system will restart in 30 seconds. /quiet Quiet mode. This is the same as unattended mode, but no status or error messages are displayed. Restart Options /norestart Does not restart when installation has completed /forcerestart Restarts the system after installation and force other applications to close at shutdown without saving open files first. /warnrestart[:x] Presents a dialog box with a timer warning the user that the system will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch. /promptrestart Display a dialog box prompting the local user to allow a restart Special Options /overwriteoem Overwrites OEM files without prompting /nobackup Does not back up files needed for uninstall /forceappsclose Forces other programs to close when the system shuts down /log:path Allows the redirection of installation log files /extract[:path] Extracts files without starting the Setup program /ER Enables extended error reporting /verbose Enables verbose logging. During installation, creates %Windir%\CabBuild.log. This log details the files that are copied. Using this switch may cause the installation to proceed more slowly. Note You can combine these switches into one command. For backward compatibility, the security update also supports the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841. For more information about the Package Installer, visit the Microsoft TechNet Web site. For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684. Removing the Update This security update supports the following setup switches. Supported Spuninst.exe Switches Switch Description /help Displays the command-line options Setup Modes /passive Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the system will restart in 30 seconds. /quiet Quiet mode. This is the same as unattended mode, but no status or error messages are displayed. Restart Options /norestart Does not restart when installation has completed /forcerestart Restarts the system after installation and force other applications to close at shutdown without saving open files first. /warnrestart[:x] Presents a dialog box with a timer warning the user that the system will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch. /promptrestart Display a dialog box prompting the local user to allow a restart Special Options /forceappsclose Forces other programs to close when the system shuts down /log:path Allows the redirection of installation log files Verifying That the Update Has Been Applied • Microsoft Baseline Security Analyzer To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the section, Detection and Deployment Tools and Guidance, earlier in this bulletin for more information. • File Version Verification Because there are several versions and editions of Microsoft Windows, the following steps may be different on your system. If they are, see your product documentation to complete these steps. 1. Click Start, and then click Search. 2. In the Search Results pane, click All files and folders under Search Companion. 3. In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search. 4. In the list of files, right-click a file name from the appropriate file information table, and then click Properties. Note Depending on the version of the operating system or programs installed, some of the files that are listed in the file information table may not be installed. 5. On the Version tab, determine the version of the file that is installed on your system by comparing it to the version that is documented in the appropriate file information table. Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation. • Registry Key Verification You may also be able to verify the files that this security update has installed by reviewing the registry keys listed in the Reference Table in this section. These registry keys may not contain a complete list of installed files. Also, these registry keys may not be created correctly when an administrator or an OEM integrates or slipstreams this security update into the Windows installation source files. Top of section Top of section Windows XP (all versions and editions) Reference Table The following table contains the security update information for this software. You can find additional information in the subsection, Deployment Information, in this section. Inclusion in Future Service Packs The update for this issue will be included in a future service pack or update rollup Deployment Installing without user intervention Windows XP Service Pack 2: Windowsxp-kb935839-x86-enu /quiet Windows XP Professional x64 Edition and Windows XP Professional x64 Edition Service Pack 2: Windowsserver2003-kb935839-x86-enu /quiet Installing without restarting Windows XP Service Pack 2: Windowsxp-kb935839-x86-enu /norestart Windows XP Professional x64 Edition and Windows XP Professional x64 Edition Service Pack 2: Windowsserver2003-kb935839-x86-enu /norestart Update log file KB935839.log Further information See the subsection, Detection and Deployment Tools and Guidance Restart Requirement Restart required Yes, you must restart your system after you apply this security update Hotpatching Not applicable Removal Information Use Add or Remove Programs tool in Control Panel or the Spuninst.exe utility located in the %Windir%\$NTUninstallKB935839$\Spuninst folder File Information See the subsection, File Information, below or Microsoft Knowledge Base Article 935839 for the full file manifest Registry Key Verification For all supported and affected 32-bit versions of Windows XP: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows XP\SP3\KB935839\Filelist For all supported and affected x64 versions of Windows XP: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows Server 2003\SP3\KB935839\Filelist File Information The English version of this security update has the file attributes that are listed in the following table. The dates and times for these files are listed in coordinated universal time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time tool in Control Panel. For all supported and affected 32-bit editions of Windows XP: File Name Version Date Time Size CPU Folder kernel32.dll 5.1.2600.3119 16-Apr-2007 15:52 984,576 X86 SP2GDR kernel32.dll 5.1.2600.3119 16-Apr-2007 16:07 986,112 X86 SP2QFE For all supported and affected editions of Windows XP Professional x64: File Name Version Date Time Size CPU Folder kernel32.dll 5.2.3790.2919 18-Apr-2007 17:25 1,501,696 X64 SP1GDR wkernel32.dll 5.2.3790.2919 18-Apr-2007 17:25 1,008,640 X86 SP1GDR\wow kernel32.dll 5.2.3790.2919 18-Apr-2007 17:25 1,502,720 X64 SP1QFE wkernel32.dll 5.2.3790.2919 18-Apr-2007 17:25 1,008,640 X86 SP1QFE\wow kernel32.dll 5.2.3790.4062 18-Apr-2007 17:27 1,503,744 X64 SP2GDR wkernel32.dll 5.2.3790.4062 18-Apr-2007 17:27 1,009,664 X86 SP2GDR\wow kernel32.dll 5.2.3790.4062 18-Apr-2007 17:25 1,504,256 X64 SP2QFE wkernel32.dll 5.2.3790.4062 18-Apr-2007 17:25 1,009,664 X86 SP2QFE\wow Note For a complete list of supported versions, see the Support Lifecycle Index. For a complete list of service packs, see Lifecycle Supported Service Packs. For more information on the support lifecycle policy, see Microsoft Support Lifecycle. Top of section Deployment Information Installing the Update When you install this security update, the installer checks to see if one or more of the files that are being updated on your system have previously been updated by a Microsoft hotfix. If you have previously installed a hotfix to update one of these files, the installer copies any applicable RTMQFE, SP1QFE, or SP2QFE files to your system. Otherwise, the installer copies the RTMGDR, SP1GDR, or SP2GDR files to your system. Security updates may not contain all variations of these files. For more information about this behavior, see Microsoft Knowledge Base Article 824994. For more information about the Package Installer, visit the Microsoft TechNet Web site. For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684. This security update supports the following setup switches. Supported Security Update Installation Switches Switch Description /help Displays the command-line options Setup Modes /passive Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the system will restart in 30 seconds. /quiet Quiet mode. This is the same as unattended mode, but no status or error messages are displayed. Restart Options /norestart Does not restart when installation has completed /forcerestart Restarts the system after installation and force other applications to close at shutdown without saving open files first. /warnrestart[:x] Presents a dialog box with a timer warning the user that the system will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch. /promptrestart Display a dialog box prompting the local user to allow a restart Special Options /overwriteoem Overwrites OEM files without prompting /nobackup Does not back up files needed for uninstall /forceappsclose Forces other programs to close when the system shuts down /log:path Allows the redirection of installation log files /integrate:path Integrates the update into the Windows source files. These files are located at the path that is specified in the switch. /extract[:path] Extracts files without starting the Setup program /ER Enables extended error reporting /verbose Enables verbose logging. During installation, creates %Windir%\CabBuild.log. This log details the files that are copied. Using this switch may cause the installation to proceed more slowly. Note You can combine these switches into one command. For backward compatibility, the security update also supports the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841. For more information about the Package Installer, visit the Microsoft TechNet Web site. Removing the Update This security update supports the following setup switches. Supported Spuninst.exe Switches Switch Description /help Displays the command-line options Setup Modes /passive Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the system will restart in 30 seconds. /quiet Quiet mode. This is the same as unattended mode, but no status or error messages are displayed. Restart Options /norestart Does not restart when installation has completed /forcerestart Restarts the system after installation and force other applications to close at shutdown without saving open files first. /warnrestart[:x] Presents a dialog box with a timer warning the user that the system will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch. /promptrestart Display a dialog box prompting the local user to allow a restart Special Options /forceappsclose Forces other programs to close when the system shuts down /log:path Allows the redirection of installation log files Verifying That the Update Has Been Applied • Microsoft Baseline Security Analyzer To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the section, Detection and Deployment Tools and Guidance, earlier in this bulletin for more information. • File Version Verification Because there are several versions and editions of Microsoft Windows, the following steps may be different on your system. If they are, see your product documentation to complete these steps. 1. Click Start, and then click Search. 2. In the Search Results pane, click All files and folders under Search Companion. 3. In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search. 4. In the list of files, right-click a file name from the appropriate file information table, and then click Properties. Note Depending on the version of the operating system or programs installed, some of the files that are listed in the file information table may not be installed. 5. On the Version tab, determine the version of the file that is installed on your system by comparing it to the version that is documented in the appropriate file information table. Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation. • Registry Key Verification You may also be able to verify the files that this security update has installed by reviewing the registry keys listed in the Reference Table in this section. These registry keys may not contain a complete list of installed files. Also, these registry keys may not be created correctly when an administrator or an OEM integrates or slipstreams this security update into the Windows installation source files. Top of section Top of section Windows Server 2003 (all versions and editions) Reference Table The following table contains the security update information for this software. You can find additional information in the subsection, Deployment Information, in this section. Inclusion in Future Service Packs The update for this issue will be included in a future service pack or update rollup Deployment Installing without user intervention Windows Server 2003 Service Pack 1 and Windows Server 2003 Service Pack 2: Windowsserver2003-kb935839-x86-enu /quiet Windows Server 2003 x64 Edition and Windows Server 2003 x64 Edition Service Pack 2: Windowsserver2003-kb935839-x86-enu /quiet Windows Server 2003 with SP1 for Itanium-based Systems and Windows Server 2003 with SP2 for Itanium-based Systems: Windowsserver2003.windowsxp-kb935839-x64-enu /quiet Installing without restarting Windows Server 2003 Service Pack 1 and Windows Server 2003 Service Pack 2: Windowsserver2003-kb935839-x86-enu /norestart Windows Server 2003 x64 Edition and Windows Server 2003 x64 Edition Service Pack 2: Windowsserver2003-kb935839-x86-enu /norestart Windows Server 2003 with SP1 for Itanium-based Systems and Windows Server 2003 with SP2 for Itanium-based Systems: Windowsserver2003.windowsxp-kb935839-x64-enu /norestart Update log file KB935839.log Further information See the subsection, Detection and Deployment Tools and Guidance Restart Requirement Restart required Yes, you must restart your system after you apply this security update Hotpatching This security update does not support HotPatching. For more information about HotPatching, see Microsoft Knowledge Base Article 897341. Removal Information Windows Server 2003 Service Pack 1 and Windows Server 2003 Service Pack 2: Use Add or Remove Programs tool in Control Panel or the Spuninst.exe utility located in the Use the Spuninst.exe utility, located in the %Windir%\$NTUninstallKB935839$\Spuninst folder File Information See the subsection, File Information, below or Microsoft Knowledge Base Article 935839 for the full file manifest Registry Key Verification For all supported and affected 32-bit versions, Itanium-based versions, and x64-based versions of Windows Server 2003 Service Pack 1 and Windows Server 2003 Service Pack 2: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows Server 2003\SP3\KB935839\Filelist File Information The English version of this security update has the file attributes that are listed in the following table. The dates and times for these files are listed in coordinated universal time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time tool in Control Panel. For all supported and affected 32-bit editions of Windows Server 2003 Service Pack 1 and Windows Server 2003 Service Pack 2: File Name Version Date Time Size CPU Folder kernel32.dll 5.2.3790.2919 18-Apr-2007 16:34 1,038,848 X86 SP1GDR kernel32.dll 5.2.3790.2919 18-Apr-2007 16:45 1,039,360 X86 SP1QFE kernel32.dll 5.2.3790.4062 18-Apr-2007 16:25 1,037,824 X86 SP2GDR kernel32.dll 5.2.3790.4062 18-Apr-2007 16:21 1,037,824 X86 SP2QFE For all supported and affected Itanium-based editions of Windows Server 2003 Service Pack 1 and Windows Server 2003 Service Pack 2: File Name Version Date Time Size CPU Folder kernel32.dll 5.2.3790.2919 18-Apr-2007 17:26 1,965,568 IA-64 SP1GDR wkernel32.dll 5.2.3790.2919 18-Apr-2007 17:26 1,008,640 X86 SP1GDR\wow kernel32.dll 5.2.3790.2919 18-Apr-2007 17:26 1,967,104 IA-64 SP1QFE wkernel32.dll 5.2.3790.2919 18-Apr-2007 17:26 1,008,640 X86 SP1QFE\wow kernel32.dll 5.2.3790.4062 18-Apr-2007 17:30 1,970,688 IA-64 SP2GDR wkernel32.dll 5.2.3790.4062 18-Apr-2007 17:30 1,009,664 X86 SP2GDR\wow kernel32.dll 5.2.3790.4062 18-Apr-2007 17:26 1,971,200 IA-64 SP2QFE wkernel32.dll 5.2.3790.4062 18-Apr-2007 17:26 1,009,664 X86 SP2QFE\wow For all supported and affected x64 editions of Windows Server 2003 Service Pack 1 and Windows Server 2003 Service Pack 2: File Name Version Date Time Size CPU Folder kernel32.dll 5.2.3790.2919 18-Apr-2007 17:25 1,501,696 X64 SP1GDR wkernel32.dll 5.2.3790.2919 18-Apr-2007 17:25 1,008,640 X86 SP1GDR\wow kernel32.dll 5.2.3790.2919 18-Apr-2007 17:25 1,502,720 X64 SP1QFE wkernel32.dll 5.2.3790.2919 18-Apr-2007 17:25 1,008,640 X86 SP1QFE\wow kernel32.dll 5.2.3790.4062 18-Apr-2007 17:27 1,503,744 X64 SP2GDR wkernel32.dll 5.2.3790.4062 18-Apr-2007 17:27 1,009,664 X86 SP2GDR\wow kernel32.dll 5.2.3790.4062 18-Apr-2007 17:25 1,504,256 X64 SP2QFE wkernel32.dll 5.2.3790.4062 18-Apr-2007 17:25 1,009,664 X86 SP2QFE\wow Note For a complete list of supported versions, see the Support Lifecycle Index. For a complete list of service packs, see Lifecycle Supported Service Packs. For more information on the support lifecycle policy, see Microsoft Support Lifecycle. Top of section Deployment Information Installing the Update When you install this security update, the installer checks to see if one or more of the files that are being updated on your system have previously been updated by a Microsoft hotfix. If you have previously installed a hotfix to update one of these files, the installer copies any applicable RTMQFE, SP1QFE, or SP2QFE files to your system. Otherwise, the installer copies the RTMGDR, SP1GDR, or SP2GDR files to your system. Security updates may not contain all variations of these files. For more information about this behavior, see Microsoft Knowledge Base Article 824994. For more information about the Package Installer, visit the Microsoft TechNet Web site. For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684. This security update supports the following setup switches. Supported Security Update Installation Switches Switch Description /help Displays the command-line options Setup Modes /passive Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the system will restart in 30 seconds. /quiet Quiet mode. This is the same as unattended mode, but no status or error messages are displayed. Restart Options /norestart Does not restart when installation has completed /forcerestart Restarts the system after installation and force other applications to close at shutdown without saving open files first. /warnrestart[:x] Presents a dialog box with a timer warning the user that the system will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch. /promptrestart Display a dialog box prompting the local user to allow a restart Special Options /overwriteoem Overwrites OEM files without prompting /nobackup Does not back up files needed for uninstall /forceappsclose Forces other programs to close when the system shuts down /log:path Allows the redirection of installation log files /integrate:path Integrates the update into the Windows source files. These files are located at the path that is specified in the switch. /extract[:path] Extracts files without starting the Setup program /ER Enables extended error reporting /verbose Enables verbose logging. During installation, creates %Windir%\CabBuild.log. This log details the files that are copied. Using this switch may cause the installation to proceed more slowly. Note You can combine these switches into one command. For backward compatibility, the security update also supports many of the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841. For more information about the Package Installer, visit the Microsoft TechNet Web site. Removing the Update This security update supports the following setup switches. Supported Spuninst.exe Switches Switch Description /help Displays the command-line options Setup Modes /passive Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the system will restart in 30 seconds. /quiet Quiet mode. This is the same as unattended mode, but no status or error messages are displayed. Restart Options /norestart Does not restart when installation has completed /forcerestart Restarts the system after installation and force other applications to close at shutdown without saving open files first. /warnrestart[:x] Presents a dialog box with a timer warning the user that the system will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch. /promptrestart Display a dialog box prompting the local user to allow a restart Special Options /forceappsclose Forces other programs to close when the system shuts down /log:path Allows the redirection of installation log files Verifying that the Update Has Been Applied • Microsoft Baseline Security Analyzer To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the section, Detection and Deployment Tools and Guidance, earlier in this bulletin for more information. • File Version Verification Because there are several versions and editions of Microsoft Windows, the following steps may be different on your system. If they are, see your product documentation to complete these steps. 1. Click Start, and then click Search. 2. In the Search Results pane, click All files and folders under Search Companion. 3. In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search. 4. In the list of files, right-click a file name from the appropriate file information table, and then click Properties. Note Depending on the version of the operating system or programs installed, some of the files that are listed in the file information table may not be installed. 5. On the Version tab, determine the version of the file that is installed on your system by comparing it to the version that is documented in the appropriate file information table. Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation. • Registry Key Verification You may also be able to verify the files that this security update has installed by reviewing the registry keys listed in the Reference Table in this section. These registry keys may not contain a complete list of installed files. Also, these registry keys may not be created correctly when an administrator or an OEM integrates or slipstreams this security update into the Windows installation source files. Top of section Top of section Top of section Other Information Acknowledgments Microsoft thanks the following for working with us to help protect customers: • Billy Rios from VeriSign for reporting the Win32 API Vulnerability (CVE-2007-2219). Top of section Support • Customers in the U.S. and Canada can receive technical support from Microsoft Product Support Services at 1-866-PCSAFETY. There is no charge for support calls that are associated with security updates. • International customers can receive support from their local Microsoft subsidiaries. There is no charge for support that is associated with security updates. For more information about how to contact Microsoft for support issues, visit the International Support Web site. Top of section Disclaimer The information provided in the Microsoft Knowledge Base is provided "as is" without warranty of any kind. Microsoft disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall Microsoft Corporation or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if Microsoft Corporation or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of liability for consequential or incidental damages so the foregoing limitation may not apply. Top of section Revisions • V1.0 (June 12, 2007): Bulletin published. [***** End Microsoft Security Bulletin (MS07-035) *****] _______________________________________________________________________________ CIAC wishes to acknowledge the contributions of Microsoft for the information contained in this bulletin. _______________________________________________________________________________ CIAC, the Computer Incident Advisory Capability, is the computer security incident response team for the U.S. Department of Energy (DOE) and the emergency backup response team for the National Institutes of Health (NIH). CIAC is located at the Lawrence Livermore National Laboratory in Livermore, California. CIAC is also a founding member of FIRST, the Forum of Incident Response and Security Teams, a global organization established to foster cooperation and coordination among computer security teams worldwide. CIAC services are available to DOE, DOE contractors, and the NIH. CIAC can be contacted at: Voice: +1 925-422-8193 (7x24) FAX: +1 925-423-8002 STU-III: +1 925-423-2604 E-mail: ciac@ciac.org Previous CIAC notices, anti-virus software, and other information are available from the CIAC Computer Security Archive. World Wide Web: http://www.ciac.org/ Anonymous FTP: ftp.ciac.org PLEASE NOTE: Many users outside of the DOE, ESnet, and NIH computing communities receive CIAC bulletins. If you are not part of these communities, please contact your agency's response team to report incidents. Your agency's team will coordinate with CIAC. The Forum of Incident Response and Security Teams (FIRST) is a world-wide organization. A list of FIRST member organizations and their constituencies can be obtained via WWW at http://www.first.org/. This document was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor the University of California nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial products, process, or service by trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation or favoring by the United States Government or the University of California. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or the University of California, and shall not be used for advertising or product endorsement purposes. LAST 10 CIAC BULLETINS ISSUED (Previous bulletins available from CIAC) R-258: FLEXnet Connect 6.0 Security Patch R-259: Authentium Command Antivirus Vulnerability R-260: Security Vulnerability in Sun Java System Web Server R-261: Security Vulnerabilities in the Java Runtime Environment Image Parsing Code R-262: CREDANT Mobile Guardian Shield Vulnerability R-263: Security Vulnerability in the Logging Mechanism for Solaris Management Console (SMC) R-264: Security Vulnerability in the Authentication Mechanism for Solaris Management Console (SMC) R-265: HP Sysetm Management Homepage (SMH) Vulnerability R-266: Security Vulnerability in How xscreensaver(1) Interacts with GNOME Assistive Technology R-267: Security Notice for CA Products Implementing the Anti-Virus Engine